Hi @TeschRenan
Thank you for the update.
Sorry that the issue still persist, let me review this issue and get back to you again.
Hi @TeschRenan
Just to clarify, do you require streaming on two devices at the same time? Or does the same behavior happen even when only one client is connected?
Hello @Pammy
Only one monitor per device.
The tests always used one AMB82 per monitor, and in our project we don’t use more than one.
Hi @TeschRenan,
Thank you for sharing the details.
For all the AMB82 mini, are they connected to the same hotspot network?
I would also like to share our internal test observations for reference:
- When we stream with 2 AMB82 mini on the same network, we observe similar behavior (brief pauses followed by fast playback), which appears to be related to shared bandwidth.
- When streaming using 1 AMB82 mini to a single client only, we do not observe the pause-and-speed-up behavior.
Hello @Pammy in our tests we never used two AMB82s on the same network. Our product consists of an AMB82 and an Android tablet running a WebSocket server and providing the access point (Hotspot).
We compared the transmission with a similar competitor product, but with a different microcontroller, and that product did not present this problem.
Hi @TeschRenan
Below is a diagram showing our test setup. Please let us know if your setup differs from ours.
Ensure that the hotspot is configured at 5 GHz. In our testing, we observed brief pauses followed by fast playback when the hotspot was set to 2.4 GHz, even though the Android device itself was connected to a 5 GHz Wi-Fi network. This behavior could be related to limited available bandwidth.
Hello @Pammy thanks for answer, after change to 5GHz the freezing is reduced drastically, in the next week we are testing more and I update you in this chat ok?
And our test is this topology.
Hi @TeschRenan ,
Hope you’re doing well. I’m following up to check whether you require any further assistance.
Thank you.