I have (3) of the AMB82-MINI cam boards and I had 2 working and now I’m getting the above error.
I’m using the Arduino IDE v2.3.6 and the example ino file:
Amb82HTTPDisplayJPEGContinuous.ino
Under the tools menu:
Board: AMB82-MINI
Auto Flash Mode: Disable
Camera Option: JXF37
Camera FCS Mode: Disable
Standard Lib: Arduino_STD_PRINTF
I can send the output of all 3 when they boot up
Also, I swapped the camera with another known good Amb82 and same results.
May I know which sensors you are using?
These are all the currently supported sensors for Arduino SDK.
Don’t know if this means anything, but on the ribbon cable to the camera: ‘PA-FP071-A-01’.
It’s the one that came with it.
I guess I don’t understand your question. It was what I ordered from Seed Studio as a AMB82-MINI.
I think that should be the JXF37.
I’ve seen that error, and I think it occurs whether things are working or not - spurious “information”.
Hate to sound like a broken record, but sure wish we could turn off or filter the error messages to just the ones that we are looking for. There’s just too much noise surrounding the signal (in the logs, I mean).
Do you want me send the output?
Hi, could you please provide the logs? May I know which SDK version you are using?
Kindly check your connection between your board and camera sensors as well.
Thank you.
I have 3 sketches I use on these AMB82-MINI’s: Amb82HTTPDisplayJPEG.ino, Amb82HTTPDisplayJPEGContinuous.ino and AmbRTSPVideoOnly.ino. It looks like they all work using the last one: Amb82RTSPVideoOnly.ino. Of course I was testing it with the RTSP streaming option for VLC. I have the outputs of one of them compiled with both Amb82HTTPDisplayJPEGContinous.ino and Amb82RTSPVideoOnly.ino. Maybe the other 2 work with just http but I don’t have any way to test them.
(Attachment output 249.txt is missing)
(Attachment bad output 249.txt is missing)
It’s working ok now. As it turns out, I was using the wrong sketch for it to work with RTSP.
