Regarding the issue of using low-power mode and Bluetooth configuration for WiFi simultaneously

ren_yucheng · July 15, 2024, 11:00am

I want to use the Bluetooth network configuration function, which can generate a record in the SD card or cache after configuring the WiFi information. Otherwise, there may be a problem where the device needs to reset the Bluetooth network after entering low-power mode and exiting low-power mode. Can amb82 solve this problem? In theory, WiFi information should also be written after Bluetooth network configuration?

M-ichae-l · September 24, 2024, 2:30am

Could you try out this demo

github.com

Ameba-AIoT/ameba-arduino-pro2/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEWifiConfig/BLEWifiConfig.ino

/*

 Example guide:
 https://www.amebaiot.com/en/amebapro2-arduino-ble-wifi-configuration/
 */

#include "BLEDevice.h"
#include "BLEWifiConfigService.h"

BLEWifiConfigService configService;

void setup()
{
    Serial.begin(115200);

    BLE.init();
    BLE.configServer(1);
    configService.addService();
    configService.begin();

This file has been truncated. show original

Topic		Replies	Views
How to save Wi-Fi credentials when using ble configuration example Technical Discussion	2	195	July 15, 2024
Configure WiFi via Bluetooth (CUSTOM APP) Technical Discussion	5	76	July 25, 2024
Enable Bluetooth for Wifi Configuration Technical Discussion	1	31	September 2, 2024
Connect and customize to Wi-Fi with BLE Arduino SDK general , arduino , rtl8720dn , bw16	1	351	July 26, 2023
BLEWifiConfig issue Technical Discussion arduino , rtl8720dn , bw16	1	377	December 12, 2022

Regarding the issue of using low-power mode and Bluetooth configuration for WiFi simultaneously

Related topics