AMB82 mini freezes

Technical Support Hardware
1

Hi, I buy 2 amb82 mini, and one of them is steel freezing. After couple hours, sometime minutes. Second works great.

2

Hi @redwater32,

Can you check with your seller if it is a faulty AMB82-Mini being sold?

Thank you.

3

Hi Im from Poland, and I buy it in digikey from USA. Sending to USA is much expensive then buy new one. I copy what telling me serial in arduino when its freeze, but after work.

4

Hi @redwater32,

Sure no problem, you can screenshot the error messages to let us confirm if it is a hardware or software issue.

Thank you.

5

Hi, on serial:

17:02:43.468 -> 
TM Queue Full cnt=550
17:02:43.468 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.469 -> 
out_cb ch1: in 0, out 0
17:02:43.469 -> 
out_cb ch2: in 0, out 0
17:02:43.469 -> 
out_cb ch4: in 0, out 0
17:02:43.469 -> 
TM Queue Full cnt=551
17:02:43.514 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.514 -> 
out_cb ch1: in 0, out 0
17:02:43.514 -> 
out_cb ch2: in 0, out 0
17:02:43.514 -> 
out_cb ch4: in 0, out 0
17:02:43.514 -> 
TM Queue Full cnt=552
17:02:43.546 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.546 -> 
out_cb ch1: in 0, out 0
17:02:43.546 -> 
out_cb ch2: in 0, out 0
17:02:43.546 -> 
out_cb ch4: in 0, out 0
17:02:43.546 -> 
TM Queue Full cnt=553
17:02:43.546 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.578 -> 
out_cb ch1: in 0, out 0
17:02:43.578 -> 
out_cb ch2: in 0, out 0
17:02:43.578 -> 
out_cb ch4: in 0, out 0
17:02:43.578 -> 
TM Queue Full cnt=554
17:02:43.578 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.578 -> 
out_cb ch1: in 0, out 0
17:02:43.611 -> 
out_cb ch2: in 0, out 0
17:02:43.611 -> 
out_cb ch4: in 0, out 0
17:02:43.611 -> 
TM Queue Full cnt=555
17:02:43.611 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.611 -> 
out_cb ch1: in 0, out 0
17:02:43.611 -> 
out_cb ch2: in 0, out 0
17:02:43.643 -> 
out_cb ch4: in 0, out 0
17:02:43.643 -> 
TM Queue Full cnt=556
17:02:43.643 -> 
out_cb ch0: in 5499219, out 5499219
17:02:43.643 -> 
out_cb ch1: in 0, out 0
17:02:43.643 -> 
out_cb ch2: in 0, out 0
17:02:43.643 -> 
out_cb ch4: in 0, out 0

wifi no reponse.

6

Hi @redwater32,

Can I check with you which arduino example are you running? Have you connected with the right SSID and password? Also, can I double confirm if you have attached the antenna on the pro2 board?

I am highly suspecting that the hardware is faulty, WIFI should be working out of the box as what you have observed with your other purchased board. Would recommend talking to the seller to see how he/she can help with any replacement of the device.

7

Hi, almost all examples with rtsp, md. Yes connectes with right ssid and password, antena attached.
Ok. Thanks for help.