Content
About AMB23
[details = Where to purchase AMB23?]
A: You can purchase the board at https://www.amebaiot.com/en/where-to-buy-link/#buy_amb23
[/details]
[details = Where can I find the pin diagrams for AMB23?]
A: Navigate to the “Getting started” page for AMB23 to see the pin diagram via https://www.amebaiot.com/en/amebad-mini-arduino-getting-started/.
[/details]
[details = Does AMB23 supports ADC function?]
A: A0 – A6 refers to the pins where ADC function is available. On AMB23, connect to D1 to D7 for ADC function.
Please refer to the pin table via:
https://www.amebaiot.com/en/amebad-mini-arduino-getting-started/
[/details]
[details = Does AMB23 have user-configurable push buttons and LEDs? ]
A: AMB23 has 1 user-configurable push button and 2 user-configurable LEDs.
[/details]
[details = Which Bluetooth standards are supported in AMB23?]
A: AMB23 development board support BLE 5.0. Classic Bluetooth (BR/EDR) is not supported.
[/details]
[details = Which BLE roles are supported?]
A: AMB23 development board can operate as either a BLE Central or BLE Peripheral device.
[/details]
[details = Are all pins on AMB23 usable?]
A: Yes, all the pins are usable.
[/details]
[details = Is XIP (execute in place) supported on AMB23?]
A: Yes, it is supported.
[/details]
[details = Does AMB23 support 5G WiFi?]
A: AMB23 supports dual band 2.4G + 5G WiFi.
[/details]
Hardware
[details = How to enter the download mode on AMB23?]
A: Press and hold the UART DOWNLOAD button. Then Press the RESET button and release both the UART DOWNLOAD and RESET buttons.
[/details]
[details = How do I know if AMB23 successfully enters download mode?]
A: First, open the Serial Monitor and enter download mode. If you successfully enter download mode, you will see “flash Download Start” in the Serial Monitor.
[/details]
Software
[details = How to add AMB23 on Arduino IDE?]
A: Open Arduino IDE. To set up correctly in Arduino IDE, go to “File” → “Preferences” and paste the following URL into the “Additional Boards Manager URLs” field with https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek.com_amebad_index.json. Next, go to “Tools” → “Board” → “Boards Manager” and install.
You may follow the guide on https://www.amebaiot.com/en/amebad-mini-arduino-getting-started/.
[/details]
Application
[details = Does AMB23 support TensorFlow Lite?]
A: Yes. You may follow the example guides here: https://www.amebaiot.com/en/amebad-rtl8722dm-mini-arduino-peripherals-examples/#ambd-arduino-peripherals.
[/details]