Build the Ameba-D on Raspberry Pi

Technical Discussion
,
1

Hi All,
I am the new for Ameba. Currently, I using the Raspberry Pi to build the official SDK to know the Ameba-D through “Ameba RTL8722DM (AMB 21)”. Dose any guide for the environment setting. I have follow the “AN0400_Ameba-D_Application_Note_v13”, but seems the GCC have some problem on Raspberry Pi.

Thanks a lot.

2

Hi sineage,

the toolchain in the GCC SDK is intended for operation on PCs running a x86 processor, and will not work with the ARM processor on the raspberry pi

1 Like
3

To do this, you might want to take a look of this link and use this toolchain instead,

1 Like