BLE scan & connect to iPixelcolor 96x16 dot-matrix display soft-panel

BLE Device : iPixelcolor 96x16 軟性顯示屏
Web App : iPixelcolor

Question : looking for AMB82-mini example code to

  1. scan & connect to BLE device
  2. send text to BLE device

Hi @rkuo2000 ,

Scan & Connect to the BLE device

The BLEConnect::connect() method handles scanning and connecting. You need the target device’s Bluetooth address and address type. BLEConnect Class

BLEConnect* bleConn = BLEDevice::configConnection();

// Set scan parameters (optional)
bleConn->setScanInterval(500); // ms, must be >= scanWindow

// Connect by BT address (replace with iPixelcolor device address)
char targetAddr[] = "XX:XX:XX:XX:XX:XX"; // <-- replace with actual address
bool connected = bleConn->connect(targetAddr, GAP_REMOTE_ADDR_LE_PUBLIC, 5000);

if (connected) {
Serial.println("Connected to iPixelcolor!");
} else {
Serial.println("Connection failed.");
}

Note: You can first run the BLEScan example (Files → Examples → AmebaBLE → BLEScan) to discover the iPixelcolor device’s Bluetooth address and address type before connecting. BLE Scan

Discover Service & Characteristic, then Send Text

After connecting, use BLEClient to discover services and get the target characteristic, then write text using writeString(). BLERemoteCharacteristic writeString

// After connection, discover services
BLEClient* client = BLEDevice::addClient(connId);
client->discoverServices();

// Get the target service by UUID (replace with iPixelcolor's service UUID)
BLERemoteService* pService = client->getService("YOUR-SERVICE-UUID");

if (pService != nullptr) {
// Get the target characteristic by UUID (replace with iPixelcolor's characteristic UUID)
BLERemoteCharacteristic* pChar = pService->getCharacteristic("YOUR-CHAR-UUID");

if (pChar != nullptr) {
// Optionally increase buffer size for longer text
pChar->setBufferLen(230); // max 230 bytes

// Send text to the BLE device
bool success = pChar->writeString("Hello iPixelcolor!");
if (success)

{ Serial.println("Text sent successfully!"); }

else

{ Serial.println("Failed to send text."); }

}
}

setBufferLen

Full Working Reference

For a complete working example of BLE client scan + connect + UART text exchange, please refer to the official BLEUartClient example: BLE UART Client

Files → Examples → AmebaBLE → BLEUartClient

Important Notes

  • You must identify the iPixelcolor device’s service UUID and characteristic UUID (for writing text) from its BLE profile. You can use nRF Connect (Android/iOS) to inspect the device’s GATT services and characteristics.

  • The characteristic data buffer defaults to 20 bytes and can be increased up to 230 bytes using setBufferLen(). setBufferLen

Thank you.