# \[VOE\]frame\_end: sensor didn't initialize done!
**URL:** https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302
**Category:** Multimedia
**Tags:** rtl8735b, evb-amb82
**Created:** [August 9, 2025, 1:38am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302 "2025-08-09T01:38:38Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 9, 2025, 1:38am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/1 "2025-08-09T01:38:38Z")
I have (3) of the AMB82-MINI cam boards and I had 2 working and now I’m getting the above error.
I’m using the Arduino IDE v2.3.6 and the example ino file:
Amb82HTTPDisplayJPEGContinuous.ino
Under the tools menu:
Board: AMB82-MINI
Auto Flash Mode: Disable
Camera Option: JXF37
Camera FCS Mode: Disable
Standard Lib: Arduino\_STD\_PRINTF
I can send the output of all 3 when they boot up
---
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 9, 2025, 3:15pm UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/2 "2025-08-09T15:15:41Z")
Also, I swapped the camera with another known good Amb82 and same results.
---
### Author:  [@Pammy](https://forum.amebaiot.com/u/Pammy)
#### Post date: [August 11, 2025, 1:13am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/3 "2025-08-11T01:13:23Z")
HI @Daniel_Hampleman
May I know which sensors you are using?
These are all the currently supported sensors for Arduino SDK.
---
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 11, 2025, 12:24pm UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/4 "2025-08-11T12:24:34Z")
Don’t know if this means anything, but on the ribbon cable to the camera: ‘PA-FP071-A-01’.
It’s the one that came with it.
---
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 11, 2025, 2:35pm UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/5 "2025-08-11T14:35:05Z")
I guess I don’t understand your question. It was what I ordered from Seed Studio as a AMB82-MINI.
[seed studio order](https://imgur.com/a/WKtkOUM)
---
### Author:  [@jimmiedave](https://forum.amebaiot.com/u/jimmiedave)
#### Post date: [August 12, 2025, 1:31am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/6 "2025-08-12T01:31:47Z")
I think that should be the JXF37.
I’ve seen that error, and I think it occurs whether things are working or not - spurious “information”.
Hate to sound like a broken record, but sure wish we could turn off or filter the error messages to just the ones that we are looking for. There’s just too much noise surrounding the signal (in the logs, I mean).
---
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 12, 2025, 9:01am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/7 "2025-08-12T09:01:39Z")
Do you want me send the output?
---
### Author:  [@Pammy](https://forum.amebaiot.com/u/Pammy)
#### Post date: [August 13, 2025, 1:31am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/8 "2025-08-13T01:31:25Z")
Hi, could you please provide the logs? May I know which SDK version you are using?
Kindly check your connection between your board and camera sensors as well.
Thank you.
---
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 14, 2025, 2:02pm UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/9 "2025-08-14T14:02:48Z")
I have 3 sketches I use on these AMB82-MINI’s: Amb82HTTPDisplayJPEG.ino, Amb82HTTPDisplayJPEGContinuous.ino and AmbRTSPVideoOnly.ino. It looks like they all work using the last one: Amb82RTSPVideoOnly.ino. Of course I was testing it with the RTSP streaming option for VLC. I have the outputs of one of them compiled with both Amb82HTTPDisplayJPEGContinous.ino and Amb82RTSPVideoOnly.ino. Maybe the other 2 work with just http but I don’t have any way to test them.
(Attachment output 249.txt is missing)
(Attachment bad output 249.txt is missing)
---
### Author:  [@Pammy](https://forum.amebaiot.com/u/Pammy)
#### Post date: [August 18, 2025, 2:57am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/10 "2025-08-18T02:57:13Z")
Hi @Daniel_Hampleman
I am unable to see your txt file.
---
### Author:  [@Daniel\_Hampleman](https://forum.amebaiot.com/u/Daniel_Hampleman)
#### Post date: [August 18, 2025, 11:57am UTC](https://forum.amebaiot.com/t/voe-frame-end-sensor-didnt-initialize-done/4302/11 "2025-08-18T11:57:43Z")
It’s working ok now. As it turns out, I was using the wrong sketch for it to work with RTSP.