# Regarding the issue of using low-power mode and Bluetooth configuration for WiFi simultaneously

**URL:** <https://forum.amebaiot.com/t/regarding-the-issue-of-using-low-power-mode-and-bluetooth-configuration-for-wifi-simultaneously/3111>\
**Category:** WiFi\
**Tags:** evb-amb82\
**Created:** [July 15, 2024, 11:00am UTC](https://forum.amebaiot.com/t/regarding-the-issue-of-using-low-power-mode-and-bluetooth-configuration-for-wifi-simultaneously/3111 "2024-07-15T11:00:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ren\_yucheng](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/ren_yucheng/32/1799_2.png) [@ren\_yucheng](https://forum.amebaiot.com/u/ren_yucheng)\
**Post date:** [July 15, 2024, 11:00am UTC](https://forum.amebaiot.com/t/regarding-the-issue-of-using-low-power-mode-and-bluetooth-configuration-for-wifi-simultaneously/3111/1 "2024-07-15T11:00:32Z")

</div>

I want to use the Bluetooth network configuration function, which can generate a record in the SD card or cache after configuring the WiFi information. Otherwise, there may be a problem where the device needs to reset the Bluetooth network after entering low-power mode and exiting low-power mode. Can amb82 solve this problem? In theory, WiFi information should also be written after Bluetooth network configuration?

---

<div class="post-metadata">

**Author:** ![M-ichae-l](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/m-ichae-l/32/33_2.png) [@M-ichae-l](https://forum.amebaiot.com/u/M-ichae-l)\
**Post date:** [September 24, 2024, 2:30am UTC](https://forum.amebaiot.com/t/regarding-the-issue-of-using-low-power-mode-and-bluetooth-configuration-for-wifi-simultaneously/3111/2 "2024-09-24T02:30:24Z")

</div>

Could you try out this demo

> <https://github.com/Ameba-AIoT/ameba-arduino-pro2/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEWifiConfig/BLEWifiConfig.ino>