# 利用 Realtek SDK 生成 normal image issue

**URL:** <https://forum.amebaiot.com/t/realtek-sdk-normal-image-issue/3609>\
**Category:** AT Cmd\
**Tags:** rtl872xd\
**Created:** [December 5, 2024, 11:56pm UTC](https://forum.amebaiot.com/t/realtek-sdk-normal-image-issue/3609 "2024-12-05T23:56:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nicklee](https://avatars.discourse-cdn.com/v4/letter/n/c77e96/32.png) [@nicklee](https://forum.amebaiot.com/u/nicklee)\
**Post date:** [December 5, 2024, 11:56pm UTC](https://forum.amebaiot.com/t/realtek-sdk-normal-image-issue/3609/1 "2024-12-05T23:56:23Z")

</div>

目前有遇到狀況 利用 Realtek SDK 生成 normal image 然後透過 Realtek image tool 燒錄成功後.  
開機之後 透過 AT command 如下:設定成AP mode 無法成功.  
是哪個環節有問題.  
ATW3=SSID  
ATW4=PWD  
ATW5=channel  
ATWA

---

<div class="post-metadata">

**Author:** ![KaiFai\_Y](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/kaifai_y/32/2252_2.png) [@KaiFai\_Y](https://forum.amebaiot.com/u/KaiFai_Y)\
**Post date:** [January 13, 2025, 3:26am UTC](https://forum.amebaiot.com/t/realtek-sdk-normal-image-issue/3609/2 "2025-01-13T03:26:04Z")

</div>

您好 @nicklee，您能到amebad官方[github](https://github.com/Ameba-AIoT/ameba-rtos-d) 提出您所遇到的問題以便官方人員更好的協助。謝謝