# Find sony camera ,I’m desperately searching for cameras for the AMB82 **URL:** \ **Category:** Multimedia\ **Created:** [December 19, 2025, 9:17am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595 "2025-12-19T09:17:58Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Moa\_Moa](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/moa_moa/32/2913_2.png) [@Moa\_Moa](https://forum.amebaiot.com/u/Moa_Moa)\ **Post date:** [December 19, 2025, 9:17am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/1 "2025-12-19T09:17:58Z")
Hello, I’m desperately searching for cameras for the AMB82, specifically the IMX327 type, for low-light vision. I film cars at night, using AI, and I need sufficient vision while avoiding being blinded by headlights. Can you help me? Sincerely, **Sony IMX Series:** IMX327, IMX307, IMX662, IMX471 ---
**Author:** ![Pammy](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/pammy/32/936_2.png) [@Pammy](https://forum.amebaiot.com/u/Pammy)\ **Post date:** [December 22, 2025, 5:49am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/2 "2025-12-22T05:49:55Z")
Hi @Moa_Moa The camera module need to follow this pinout table in order to be compatible with the AMB82 Mini. ![image](https://us1.discourse-cdn.com/flex016/uploads/ameba/original/2X/6/68ac5861b6c2333117a8e1a7309e25c2209daeab.png) You may also contact **Taiyee** for camera module customization. You may refer to the following link for camera module manufacturers: [Contact for camera sensor module manufacturing](https://forum.amebaiot.com/t/contact-for-camera-sensor-module-manufacturing/3779) ---
**Author:** ![Moa\_Moa](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/moa_moa/32/2913_2.png) [@Moa\_Moa](https://forum.amebaiot.com/u/Moa_Moa)\ **Post date:** [December 24, 2025, 3:05pm UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/3 "2025-12-24T15:05:32Z")
Hello, i try, but website error and no replay from mail… Have you an idea to use any stravis camera on AMB82 ? if possible IMX662 ? thanks ! ---
**Author:** ![M-ichae-l](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/m-ichae-l/32/33_2.png) [@M-ichae-l](https://forum.amebaiot.com/u/M-ichae-l)\ **Post date:** [December 29, 2025, 4:19am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/4 "2025-12-29T04:19:52Z")
Could you also refer to [Realtek AmebaPro2 HW design Guide — AmebaPro2's Documentation v0.1 documentation](https://ameba-doc-rtos-pro2-sdk.readthedocs-hosted.com/en/latest/hw_design/index.html) for more HW design suggestions? Thank you. ---
**Author:** ![Moa\_Moa](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/moa_moa/32/2913_2.png) [@Moa\_Moa](https://forum.amebaiot.com/u/Moa_Moa)\ **Post date:** [December 30, 2025, 7:54am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/5 "2025-12-30T07:54:36Z")
Hello Michael, I contacted Taiyee by email, but the website is down and they’re not replying to emails. I looked into the Hub8735U to use PS5268 (but it’s not compatible with AMB82). Do you know of a manufacturer that could make PS5268 or IMX662 cameras that work directly with AMB82? (I’ve already tried buying and customizing them, and it requires a lot of adjustments with mediocre results.) Thank you for your help! ---
**Author:** ![Pammy](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/pammy/32/936_2.png) [@Pammy](https://forum.amebaiot.com/u/Pammy)\ **Post date:** [February 5, 2026, 6:36am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/6 "2026-02-05T06:36:44Z")
Hi @Moa_Moa, We are currently working on adapting Arducam camera for AmebaPro2 platform. In the meantime, based on your requirements, you may explore [IMX209](https://www.arducam.com/presale-arducam-2mp-ultra-low-light-starvis-imx290-motorzied-ir-cut-camera-for-raspberry-pi.html), as its specifications and pricing are comparable to IMX327. ---
**Author:** ![Moa\_Moa](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/moa_moa/32/2913_2.png) [@Moa\_Moa](https://forum.amebaiot.com/u/Moa_Moa)\ **Post date:** [February 5, 2026, 7:31am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/7 "2026-02-05T07:31:02Z")
My question is a bit silly! It probably involves mapping the IMX290 pins and adapting the Freertos code? I’m likely going to ask another awkward question: why is there a list of supported cameras in Arduino if you can’t actually find them? It requires a lot of custom PCB work. I’ve asked two manufacturers to make cameras with JXF37 pins, and I hope it works… Is it possible to get some kind of schematic or design guide for this custom setup? Thanks for you help ! ---
**Author:** ![inxnik](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/inxnik/32/2908_2.png) [@inxnik](https://forum.amebaiot.com/u/inxnik)\ **Post date:** [February 6, 2026, 11:42am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/8 "2026-02-06T11:42:35Z")
Hello! I ordered an IMX327 camera module from Supertech. Where can I find example code or a driver to test the connection? ---
**Author:** ![yenhuei](https://avatars.discourse-cdn.com/v4/letter/y/a8b319/32.png) [@yenhuei](https://forum.amebaiot.com/u/yenhuei)\ **Post date:** [February 9, 2026, 3:08am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/9 "2026-02-09T03:08:42Z")
Hello @inxnik , Please ensure that the physical pin configuration of your camera module is exactly the same as the image shared by Pammy earlier in this thread. Once that is verified, you may select the camera within Arduino IDE under the `Tools` section as shown below. You can run the `Files -> Examples -> AmebaMultimedia -> StreamRTSP -> VideoOnly` to check if it is working normally. ![change_camera](https://us1.discourse-cdn.com/flex016/uploads/ameba/original/2X/e/e9ba9341a63f07e9d156fb17a110b73ce5ba69b0.jpeg) ---
**Author:** ![inxnik](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/inxnik/32/2908_2.png) [@inxnik](https://forum.amebaiot.com/u/inxnik)\ **Post date:** [February 9, 2026, 1:02pm UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/10 "2026-02-09T13:02:42Z")
Dear Realtek Ameba support, We are using Ameba2 Pro Mini (RTL8735B) with a camera module based on Sony IMX327. The module manufacturer (Supertek/CZTEK) provided configuration file IMX327\_4L\_1950x1080\_RAW10\_11\_34.ini with the following parameters: - Resolution: 1950×1080 (PixelWidth 1950, PixelHeight 1080) - Frame rate: 24 fps (sensor output) - MIPI 4 lane, RAW10, I2C address 0x34 In Arduino we have selected Board: Ameba2 Pro Mini, Tools → Camera: IMX327. The firmware loads sensor\_imx327.bin and iq\_imx327.bin from the package (e.g. ameba\_pro2\_tools 1.4.5, SENSOR\_IMX327). Sensor is reported as id 1. Problem: The video pipeline fails to open. Serial log shows: - [video\_voe\_presetting] fps:24 w:1920 h:1080 - sensor id 1 iq\_data 17840 sensor\_data 29940 - VOE command 0x206 fail ret 0x1 - VOE\_OPEN\_CMD command fail - hal\_video\_open fail - [VID Err] Please check sensor id first, the id is 1 We have tried: - VIDEO\_FHD 1920×1080 @ 24 fps and 30 fps - VIDEO\_HD 1280×720 - RTSP (H.264) and HTTP JPEG examples — the same error at Camera.videoInit() / hal\_video\_open - Tools → Camera = IMX327 confirmed So the sensor is detected (id 1) but VOE does not open. We suspect a mismatch: our module is 1950×1080 per manufacturer INI, while the SDK’s IMX327 binaries may be for 1920×1080 or a different register set. We have: - Full serial log from boot until the error - Manufacturer’s INI (IMX327\_4L\_1950x1080\_RAW10\_11\_34.ini) and register list extracted from it (FullModeParams, ExposureParams, GainParams, etc.) Could you please advise: 1. Is there a recommended sensor\_imx327.bin / iq\_imx327.bin (or sensor set) for IMX327 at 1950×1080 that we can use with the current Ameba Pro2 Arduino package? If yes, where to obtain it and how to install (replace files in video\_img / voe\_bin)? 2. Is there an SDK update, patch, or different build option (e.g. RTOS SDK sensor.h + custom resolution 1950×1080) that we should use for this module? 3. Any known limitation or required configuration for IMX327 1950×1080 on RTL8735B (e.g. only via RTOS SDK, specific sensor id, or IQ version)? We have also contacted the camera module manufacturer (Supertek/CZTEK) in parallel to request RTL8735B-compatible sensor binaries or a conversion tool from their INI format. Thank you in advance for your help. ---
**Author:** ![Pammy](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/pammy/32/936_2.png) [@Pammy](https://forum.amebaiot.com/u/Pammy)\ **Post date:** [February 10, 2026, 2:19am UTC](https://forum.amebaiot.com/t/find-sony-camera-i-m-desperately-searching-for-cameras-for-the-amb82/4595/11 "2026-02-10T02:19:54Z")
Hi @Moa_Moa, > [@Moa\_Moa](#): > > It probably involves mapping the IMX290 pins and adapting the Freertos code? Yes, once it is supported in the FreeRTOS SDK, we will be able to support it in the Arduino SDK as well. > [@Moa\_Moa](#): > > I’m likely going to ask another awkward question: why is there a list of supported cameras in Arduino if you can’t actually find them? The list of supported cameras in Arduino/ FreeRTOS SDK reflects the sensors that are technically supported by the SDK/driver and have been validated internally. While there are many camera sensors available online, compatibility with the AmebaPro2 Mini depends on whether the camera module follows the supported pinout. > **[What is the mipi connection for AMB82-mini (Ameba-pro2)? — Ameba Arduino AIoT...](https://ameba-doc-arduino-sdk.readthedocs-hosted.com/en/latest/FAQ/ameba-pro2_mipi_connection.html)** > [@Moa\_Moa](#): > > It requires a lot of custom PCB work. I’ve asked two manufacturers to make cameras with JXF37 pins, and I hope it works… If you are looking for JXF37 related schematic or design guide, you can refer to, 1. [AMB82-mini Datasheets Download-en – Realtek IoT/Wi-Fi MCU Solutions](https://www.amebaiot.com/en/datasheet-download-amb82-mini/) If you are interesting in knowing how the camera sensor is brought up, you can refer to: > **[Camera Module Bring Up Guide – Realtek IoT/Wi-Fi MCU Solutions](https://www.amebaiot.com/en/camera-module-bring-up-guide/)**