# 詢問關於AMB82 AI 模型轉換

**URL:** <https://forum.amebaiot.com/t/amb82-ai/4663>\
**Category:** AI\
**Created:** [January 21, 2026, 3:38am UTC](https://forum.amebaiot.com/t/amb82-ai/4663 "2026-01-21T03:38:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Davis](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/davis/32/3041_2.png) [@Davis](https://forum.amebaiot.com/u/Davis)\
**Post date:** [January 21, 2026, 3:38am UTC](https://forum.amebaiot.com/t/amb82-ai/4663/1 "2026-01-21T03:38:57Z")

</div>

最近嘗試在edge impulse製作模型並把模型使用在amb82-mini上，根據我所做出來的模型選擇的是CNN-GRAY並依據網站所提供的轉換要求([https://www.amebaiot.com/zh/amebapro2-ai-convert-model/](https://www.amebaiot.com/zh/amebapro2-ai-convert-model/))將.h5以及.tensor檔案上傳，結果有傳成功，但都沒收到回覆 🥲 。

這邊想問問有沒有人有相關經驗 🙏

---

<div class="post-metadata">

**Author:** ![Pammy](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/pammy/32/936_2.png) [@Pammy](https://forum.amebaiot.com/u/Pammy)\
**Post date:** [January 23, 2026, 10:09am UTC](https://forum.amebaiot.com/t/amb82-ai/4663/2 "2026-01-23T10:09:07Z")

</div>

Hi @Davis ,

方便分享您的模型嗎？

謝謝

---

<div class="post-metadata">

**Author:** ![Davis](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/davis/32/3041_2.png) [@Davis](https://forum.amebaiot.com/u/Davis)\
**Post date:** [January 24, 2026, 1:42am UTC](https://forum.amebaiot.com/t/amb82-ai/4663/3 "2026-01-24T01:42:37Z")

</div>

[trafficlight\_model.zip](https://forum.amebaiot.com/uploads/short-url/hyfGdKETdrrujduPQEF6ST69b8w.zip) (2.0 MB)這兩個檔案是根據轉換器所要求的

---

<div class="post-metadata">

**Author:** ![Pammy](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.amebaiot.com/pammy/32/936_2.png) [@Pammy](https://forum.amebaiot.com/u/Pammy)\
**Post date:** [January 29, 2026, 2:45am UTC](https://forum.amebaiot.com/t/amb82-ai/4663/4 "2026-01-29T02:45:36Z")

</div>

Hi @Davis,

問題應該是出現在您的 .tensor 文檔。Conversion tool 只能接受 ASCII 格式, 而您的 .tensor 是 binary 格式。 所以在 quantization 的步驟出了問題。您可以先把 .tensor 文檔從 binary 轉成 ASCII 格式，再重新試看看。

我使用 WSL 查看 .tensor 文檔時，顯示為 “data”，這表示它是 binary 格式。  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/ameba/original/2X/5/54e8926b363b6e31da6ad2a20e75fede2ad23ce5.png)